题目

为ZZZ公司的三层设备配置单区域OSPF路由协议（需要为每台设备配置router-id），并将路由器上的缺省路由利用ospf通告给其他三层设备。

命令

router ospf 1
router-id 1.1.1.1
network 192.168.3.0 0.0.0.255 area 0
network 192.168.4.0 0.0.0.255 area 0
network 192.168.99.0 0.0.0.255 area 0
network 192.168.100.0 0.0.0.255 area 0
network 192.168.101.0 0.0.0.255 area 0

router ospf 1
router-id 2.2.2.2
network 192.168.3.0 0.0.0.255 area 0
network 192.168.4.0 0.0.0.255 area 0
network 192.168.99.0 0.0.0.255 area 0
network 192.168.100.0 0.0.0.255 area 0
network 192.168.102.0 0.0.0.255 area 0

router ospf 1
router-id 3.3.3.3
network 108.76.54.228 0.0.0.3 area 0
network 192.168.101.0 0.0.0.255 area 0
network 192.168.102.0 0.0.0.255 area 0
network 0.0.0.0 255.255.255.255 area 0

#配置被动接口
RouterZZZ(config-router)#passive-interface 接口
文章目录